ROAR Approved Non-Timing ESC

Manufacture Part Number Name/Description Software Version Special Notes
Calandra Racing Concepts CRC4000 Advanced Electronics Black Diamond LV 2.1 software or higher Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1
Calandra Racing Concepts CRC4002 Advanced Black Diamond 2.1 software or higher Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1
Castle Creations Mamba Max Pro V1.26
Dynamite DYNP1001 Platinum Sensored ESC Software not upgradable Blue LED flashes when throttle is at neutral in zero-timing mode.
Graupner GmbH & Co. GM-Genius 120 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
Graupner GmbH & Co. GM-Genius 150 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
Graupner GmbH & Co. GM-Genius 75 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active Software Version V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
Graupner GmbH & Co. GM-Genius 90 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
Hacker Motor GmbH TENSORIC10 Tensoric 10 Competition ESC (160A) V3.0_120516 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbico DTXM1300 Duratrax DE10 Brushless Programable ESC A blinking green LED will be displayed when the ESC is at 0 (zero) degrees of timing and the throttle is at neutral. Also, if the ESC is at any advancement in timing the LED will be solid green
Hobbywing 81020000(blue) or 81020011(black) Justock Club SPEC N/A Zero timing and non-adjustable
Hobbywing 81020010(blue) or 81020011(black) Xtreme Stock 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbywing 81020050 Xerun 60A-SD V2.1 (Blue) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbywing 81020051 Xerun 60A-SD V2.1 (Black) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbywing 81020170 Xerun 120A-SD V2.1 (Blue) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbywing 81020171 Xerun 120A-SD V2.1 (Black) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbywing 81020210 Xerun 120A-1S (Black) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbywing 81020211 Xerun 120A-1S (Blue) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Hobbywing 81020310 81020320 81020330 XERUN-120A V3 Software V3.1_121129_beta ESC must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode
Hobbywing 81020340 81020350 81020360 XERUN-120A V3.1 Software V3.1_121129_beta ESC must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode
KO Propo 40051 VFS-1 BMC Ver 1.5 Contact Mfg for Firmware Upgrade Must use zero timing and zero Advanced Profile signified by blinking LED on switch.
KO PROPO America 4100 BLZ-350 ESC Set to zero timing in firware. Cannot program any timing into ESC
Losi LOSB9500 1/10th Xcelorin Brushless ESC 01.01.30 Must use zero timing and zero Advanced Profile signified by blinking color LED
Losi LOSB9503 MSC540BL-S Sensored ESC, 13.5T Limit There is no timing function available with this. There is no LED indication.
LRP 80960 Flow Competition 1.4 or 3.3 or 4.0 or 5.0 Zero timing – the Blue LED flashes when the throttle is in neutral position
LRP 80970 Flow Works Team 1.4 The blue LED flashes when the throttle is in the neutral position
LRP 80970 Flow Works Team 1.4 or 3.3 or 4.0 or 5.0 Zero timing – the Blue LED flashes when the throttle is in neutral position
LRP LRP80100 Ai Brushless Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
LRP LRP80150 Ai Brushless Pro Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
LRP LRP80400 SPX Brushless Super Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
LRP LRP80410 Crawler ESC N/A Non-updateable; SC has no modes that will give any timing increase.
LRP LRP80450 SPX Brushless Bullet Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
LRP LRP80500 Sphere Brushless ESC N/A Non-updateable; SC has no modes that will give any timing increase.
LRP LRP80705 SPX Zero Non-updateable; Zero timing when power profile is set to 0. Red LED will flash in neutral to indicate zero timing
LRP LRP80905 LRP SXX Comp V2 1.3,1.5 Mode 3 timing must be set to “0″ signified by blinking blue LED in neutral
LRP LRP809055 LRP SXX TC spec V2 1.3,1.5 Mode 3 timing must be set to “0″ signified by blinking blue LED in neutral
LRP LRP80910 SXX Stock Spec Brushless N/A Non-updateable. Mode 3 timing must be set to “0″ signified by blinking blue LED when in neutral.
LRP LRP80915 SXX Stock Spec V2 4.2,4.4 Desc: For Spec zero timing mode, both mode 2 (torque) and mode 3(timing) must be set to zero. Blue LED will blink in neutral
LRP LRP80999 SXX Mod and Stock Upgrade board V 3.1 Zero timing-BLUE LED flashing
Novak 1730 Impact Brushless Racing ESC 000 Zero timing mode indicated by blinking whie LED. Note this is different than previous Novak ESCs
Novak 1852 The Club ESC 000 NO timing in this ESC
Novak NOV1708 GTB2 Sportsman ESC Low Profile 000 There is NO timing in this ESC. The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF”.
Novak NOV1709 GTB2 Sportsman ESC 000 The White LED will blink during the start up to
Novak NOV1710 Novak GTB N/A
Novak NOV1711 Novak GTB Spectrum N/A
Novak NOV1712 Novak Slyder Drift N/A
Novak NOV1731 Novak Havoc 1 Cell N/A
Novak NOV1732 Novak Havoc Sport N/A
Novak NOV1733 Havoc 3S Brushless ESC (this ESC can be run on 2S or 3S) No timing built into ESC
Novak NOV1735 Novak Havoc Pro N/A
Novak NOV1740 Kinetic Racing Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default)
Novak NOV1741 Kinetic 1S Racing Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default) **Note, this ESC will be shipping in August 2010
Novak NOV1743 OVAL SPEC 1S Brushless ESC 000 When NO timing in this ESC. The White LED will blink while powered on. If the white led is on then timing is active. NOTE this is different than past Novak ESC’s
Novak NOV1745 Havoc Pro SC Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default)
Novak NOV1745 Havoc Pro SC w/XDRIVE ESC 000 There is NO timing in this ESC. The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF.”
Novak NOV1748 GTB2 Low Profile W/XDRIVE ESC 000 There is NO timing in this ESC. The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF.”
Novak NOV1749 GTB2 W/XDRIVE ESC 000 The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF.”
Novak NOV1850 The Edge Brushless ESC w/Traxxas 000 There is NO timing in this ESC. The white LED will blink during start up to
Novak NOV1851 The Edge Brushless ESC w/Tamiya 000 There is NO timing in this ESC. The white LED will blink during start up to
ORCA OES112V1 ORCA Vritra VX-1Titanium Color V3 Zero timing mode indicated by BLINKING blue LED at neutral. Using ORCA program box, set the following settings: Timing 0 Degree, Turbo delay off, Turbo timing Off, Turbo interval to 0. Software version displayed on program box.
ORCA OES380VX ORCA Vrita VX Orange/Ti/Blue V3 Zero timing mode indicated by blinking blue LED at neutral. Using ORCA Program box set the following ESC settings. Timing 0 degree, Turbo delay off, Turbo timing off, Turbo interval to 0. Software version displayed on program box.
Savox 21ESC1160001 Razor160A V1 Zero timing mode indicated by BLINKING blue LED at neutral
Speed Passion 12280 Cirtix Stock Club Race Non-Programable No Timing adjustments-Signified by blinking LED
Speed Passion EXT98802LPF LPF 2.1 ESC (Carbon, Silver, Blue) V508 Must use zero timing and zero Advanced Profile signified by blinking LED
Speed Passion EXT98802LPFSxx GT2.1-EX ESC (xx=color,Carbon, Silver or Blue Version) V508 Must use zero timing and zero Advanced Profile signified by blinking LED
Speed Passion EXT98802PROSxx GT2.1-ProStock ESC (xx=color, Black or Blue Version) V508 Must use zero timing and zero Advanced Profile signified by blinking LED
Speed Passion EXT98802PROxx GT2-Pro ESC (xx=color, Carbon, Silver or Blue Version) 508 Must use zero timing and zero Advanced Profile signified by blinking LED
Speed Passion SP000010 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Speed Passion SP000043 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Speed passion SP000048 Reventon Stock Club Race ESC ST0 (stock0) There is no timing in this ESC, signified by blinking LED
Speed Passion SP000060 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Speed Passion SP000061 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Speed Passion SP000063 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Speed Passion SP000064 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Speed Passion SP000162 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Speed Passion SP000222 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
Team Novak 1755 Pulse Brushless Pro 2S Racing ESC V0 Zero timing- the white LED flashes when the throttle is in the neutral position. Note: The WHITE LED blinking on this Novak ESC is different than previous Novak ESCs where the white LED would be OFF to indicate zero timing
Team Orion ORI65101 Vortex R10 Pro ESC (120A,1S-2S) 1.68 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Team Orion ORI65102 Vortex R10 Pro ESC (160A,2S-3S) 1.68 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Team Orion ORI65109 Vortex R10 Race ESC (90A,2S-3S) 1.68 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
Team Orion ORI65120 Vortex R10 Stock Zero Timing 1.71 Zero timing-the Red LED Flashes when the ESC is active and throttle in neutral position
Team Powers TP-XPS Pro-C-V1.2 ESC Hardware Ver. 1.2 V0 Zero timing mode indicated by BLINKING Green LRD at neutral. ESC not firmware updateable
Team Powers TP-XPS EL-C40A ESC Hardware Ver. 1.2 V0 Zero timing mode indicated by BLINKING green LED at neutral. ESC not firmware updateable
Team Powers TP-XPS/Sport Sport-C-70 ESC Hardware Ver. 1.2 V0 Zero timing mode indicated by BLINKING green LED at neutral. ESC not firmware updateable.
Tekin TT1152 Tekin RS ESC 223 ** NOTE NEW SOFTWARE PROFILE** When in LOCKED no timing mode LED 3, 4, 5 will be on and blinking.
Tekin TT1152 Tekin RS Gen2 Electronic Speed Control V238 Zero timing locked SPEC mode- LED’s 3, 4, and 5 flash for ROAR events. Unlocked zero timing is LED’s 3, and 5 flashing
Tekin TT1153 Tekin RS Pro ESC 223 ** NOTE: NEW SOFTWARE PROFILE When in LOCKED no timing mode LED 3, 4, 5 will be on and blinking.
Viper RC Solutions 6VSVT01001 Viper VTX1 A55 GREEN LED Blinks on switch box in neutral
Viper RC Solutions 6VSVT10011 Viper VTX10 A55 GREEN LED Blinks on switch box in neutral
Viper RC Solutions 6VSVT10015 Viper VTX10 BE A55 GREEN LED Blinks on switch box in neutral
Viper RC Solutions 6VSVT10R15 Viper VTX10 R A55 GREEN LED Blinks on switch box in neutral
Viper RC Solutions 6VSVT10R20 Viper VTX10R BE A55 GREEN LED Blinks on switch box in neutral