Approved Non-Timing ESC
Part Number Name/Description Software Version Affiliate Tech Details Special Notes

Calandra Racing Concepts

CRC4000 Advanced Electronics Black Diamond LV 2.1 software or higher Calandra Racing Concepts   Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1
CRC4002 Advanced Black Diamond 2.1 software or higher   Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1

Castle Creations

Mamba Max Pro V1.26  

Dynamite

DYNP1001 Platinum Sensored ESC Software not upgradable   Blue LED flashes when throttle is at neutral in zero-timing mode.

Graupner GmbH & Co.

GM-Genius 120 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0   Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
GM-Genius 150 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0   Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
GM-Genius 75 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active Software Version V13.0   Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
GM-Genius 90 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0   Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.

Hacker Motor GmbH

TENSORIC10 Tensoric 10 Competition ESC (160A) V3.0_120516   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.

Hobbico

DTXM1300 Duratrax DE10 Brushless Programable ESC   A blinking green LED will be displayed when the ESC is at 0 (zero) degrees of timing and the throttle is at neutral. Also, if the ESC is at any advancement in timing the LED will be solid green

Hobbywing

30112101001 Xerun-120A V3.1 Stock Spec V3.1_121129_Beta Hobbywing Technology Co. Ltd.   Activate non-timing w/program box to Profile 2. Red LED, 0..31 seconds/flash
30112121051 Xerun-120A-1S-V3.1 V3.1_121129_Beta Hobbywing Technology Co. Ltd.   Activate non-timing w/program box to Profile 2. Red LED, 0.28 seconds/flash
81020000(blue) or 81020011(black) Justock Club SPEC N/A   Zero timing and non-adjustable
81020010(blue) or 81020011(black) Xtreme Stock 508   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.
81020050 Xerun 60A-SD V2.1 (Blue) 508   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.
81020051 Xerun 60A-SD V2.1 (Black) 508   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.
81020170 Xerun 120A-SD V2.1 (Blue) 508   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.
81020171 Xerun 120A-SD V2.1 (Black) 508   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.
81020210 Xerun 120A-1S (Black) 508   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.
81020211 Xerun 120A-1S (Blue) 508   Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.
81020310 81020320 81020330 XERUN-120A V3 Software V3.1_121129_beta   ESC must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode
81020340 81020350 81020360 XERUN-120A V3.1 Software V3.1_121129_beta   ESC must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode

KO Propo

40051 VFS-1 BMC Ver 1.5 Contact Mfg for Firmware Upgrade   Must use zero timing and zero Advanced Profile signified by blinking LED on switch.

KO PROPO America

4100 BLZ-350 ESC   Set to zero timing in firware. Cannot program any timing into ESC

Losi

LOSB9500 1/10th Xcelorin Brushless ESC 01.01.30   Must use zero timing and zero Advanced Profile signified by blinking color LED
LOSB9503 MSC540BL-S Sensored ESC, 13.5T Limit   There is no timing function available with this. There is no LED indication.

LRP

80960 Flow Competition 1.4 or 3.3 or 4.0 or 5.0   Zero timing - the Blue LED flashes when the throttle is in neutral position
80960 Flow Competition 4.4 LRP electronic GmbH   Blue LED 1.28 seconds/flash. St Torque Timing (Mode 5) and Boost Timong (Mode 6) to zero
80960 Flow Competition 3.8 LRP electronic GmbH   Blue LED 1.28 seconds/flash. Set Torque Timing (Mode 5) and Boost Timing (Mode 6) to zero
80970 Flow Works Team 1.4   The blue LED flashes when the throttle is in the neutral position
80970 Flow Works Team 1.4 or 3.3 or 4.0 or 5.0   Zero timing - the Blue LED flashes when the throttle is in neutral position
80970 Flow Works Team 3.8 LRP electronic GmbH   Blue LED 1.28 seconds/flash Set Tourque Timing (Mode 5) and Boost Timing (Mode 6) to zero
LRP80100 Ai Brushless Reverse N/A   Non-updateable; SC has no modes that will give any timing increase.
LRP80150 Ai Brushless Pro Reverse N/A   Non-updateable; SC has no modes that will give any timing increase.
LRP80400 SPX Brushless Super Reverse N/A   Non-updateable; SC has no modes that will give any timing increase.
LRP80410 Crawler ESC N/A   Non-updateable; SC has no modes that will give any timing increase.
LRP80450 SPX Brushless Bullet Reverse N/A   Non-updateable; SC has no modes that will give any timing increase.
LRP80500 Sphere Brushless ESC N/A   Non-updateable; SC has no modes that will give any timing increase.
LRP80705 SPX Zero   Non-updateable; Zero timing when power profile is set to 0. Red LED will flash in neutral to indicate zero timing
LRP80905 LRP SXX Comp V2 1.3,1.5   Mode 3 timing must be set to "0" signified by blinking blue LED in neutral
LRP809055 LRP SXX TC spec V2 1.3,1.5   Mode 3 timing must be set to "0" signified by blinking blue LED in neutral
LRP80910 SXX Stock Spec Brushless N/A   Non-updateable. Mode 3 timing must be set to "0" signified by blinking blue LED when in neutral.
LRP80915 SXX Stock Spec V2 4.2,4.4   Desc: For Spec zero timing mode, both mode 2 (torque) and mode 3(timing) must be set to zero. Blue LED will blink in neutral
LRP80999 SXX Mod and Stock Upgrade board V 3.1   Zero timing-BLUE LED flashing

Novak

1730 Impact Brushless Racing ESC 000   Zero timing mode indicated by blinking whie LED. Note this is different than previous Novak ESCs
1852 The Club ESC 000   NO timing in this ESC
NOV1708 GTB2 Sportsman ESC Low Profile 000   There is NO timing in this ESC. The White LED will blink during the start up to "prove" it works, but will remain off during all normal operation to indicate that timing is "OFF".
NOV1709 GTB2 Sportsman ESC 000   The White LED will blink during the start up to
NOV1710 Novak GTB N/A  
NOV1711 Novak GTB Spectrum N/A  
NOV1712 Novak Slyder Drift N/A  
NOV1731 Novak Havoc 1 Cell N/A  
NOV1732 Novak Havoc Sport N/A  
NOV1733 Havoc 3S Brushless ESC   (this ESC can be run on 2S or 3S) No timing built into ESC
NOV1735 Novak Havoc Pro N/A  
NOV1740 Kinetic Racing Brushless ESC Version 1.0 software or higher   ESC must be set at Timing Level = 1 or Zero Timing (default)
NOV1741 Kinetic 1S Racing Brushless ESC Version 1.0 software or higher   ESC must be set at Timing Level = 1 or Zero Timing (default) **Note, this ESC will be shipping in August 2010
NOV1743 OVAL SPEC 1S Brushless ESC 000   When NO timing in this ESC. The White LED will blink while powered on. If the white led is on then timing is active. NOTE this is different than past Novak ESC’s
NOV1745 Havoc Pro SC Brushless ESC Version 1.0 software or higher   ESC must be set at Timing Level = 1 or Zero Timing (default)
NOV1745 Havoc Pro SC w/XDRIVE ESC 000   There is NO timing in this ESC. The White LED will blink during the start up to "prove" it works, but will remain off during all normal operation to indicate that timing is "OFF."
NOV1748 GTB2 Low Profile W/XDRIVE ESC 000   There is NO timing in this ESC. The White LED will blink during the start up to "prove" it works, but will remain off during all normal operation to indicate that timing is "OFF."
NOV1749 GTB2 W/XDRIVE ESC 000   The White LED will blink during the start up to "prove" it works, but will remain off during all normal operation to indicate that timing is "OFF."
NOV1850 The Edge Brushless ESC w/Traxxas 000   There is NO timing in this ESC. The white LED will blink during start up to
NOV1851 The Edge Brushless ESC w/Tamiya 000   There is NO timing in this ESC. The white LED will blink during start up to

ORCA

OES112V1 ORCA Vritra VX-1Titanium Color V3   Zero timing mode indicated by BLINKING blue LED at neutral. Using ORCA program box, set the following settings: Timing 0 Degree, Turbo delay off, Turbo timing Off, Turbo interval to 0. Software version displayed on program box.
OES112V1, OES12OV1, OES21BV1 Vritra VX1 TITANIUM, ORANGE, BLUE 3.3 - 130715A About RC Racing   Blue LED, 0.36 seconds/flash
OES112V1, OES12OV1, OES21BV1 ORCA Vritra VX1 4.1 - 140419A About RC Racing   Blue LED 0.36 seconds/flash. Under Stock or Modified mode, set Timing at 0; Turbo Timing at OFF.
OES360VB, OES380VX, OES390VO ORCA Vritra VX TITANIUM, ORANGE,BLUE 3.3 - 130715A About RC Racing   Blue LED, 0.37 second/flash
OES380VX ORCA Vrita VX Orange/Ti/Blue V3   Zero timing mode indicated by blinking blue LED at neutral. Using ORCA Program box set the following ESC settings. Timing 0 degree, Turbo delay off, Turbo timing off, Turbo interval to 0. Software version displayed on program box.
OES610XT, OES620XO, OES630XB Vritra VXX TITANIUM, ORANGE, BLUE 3.3 - 130715B About RC Racing   Blue LED, 0.36 seconds/flash
OES610XT, OES620XO, OES630XB ORCA Vritra VXX 4.1 - 140419A TIANCO LTD Details   To activate Non-Timing mode: Use program card to set ESC in Stock mode and set timing to zero

Savox

21ESC1160001 Razor160A V1   Zero timing mode indicated by BLINKING blue LED at neutral

SchuurSpeed

Extreme SPEC N/A SchuurSpeed   Blue LED flashes every .45 seconds

Speed Passion

12280 Cirtix Stock Club Race Non-Programable   No Timing adjustments-Signified by blinking LED
EXT98802LPF LPF 2.1 ESC (Carbon, Silver, Blue) V508   Must use zero timing and zero Advanced Profile signified by blinking LED
EXT98802LPFSxx GT2.1-EX ESC (xx=color,Carbon, Silver or Blue Version) V508   Must use zero timing and zero Advanced Profile signified by blinking LED
EXT98802PROSxx GT2.1-ProStock ESC (xx=color, Black or Blue Version) V508   Must use zero timing and zero Advanced Profile signified by blinking LED
EXT98802PROxx GT2-Pro ESC (xx=color, Carbon, Silver or Blue Version) 508   Must use zero timing and zero Advanced Profile signified by blinking LED
SP000010 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
SP000043 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.

Speed Passion

SP000043 (Orange); SP000063(Blue); SP000064(Silver) Reventon R V1_1_0_24_stock0v21 King - Golden   Yellow LED on, Red double blink, pause, repeat every 1.84 seconds

Speed passion

SP000048 Reventon Stock Club Race ESC ST0 (stock0)   There is no timing in this ESC, signified by blinking LED

Speed Passion

SP000060 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
SP000061 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
SP000062(Silver); SP000060 (Orange) SP000010 (Blue); SP000061 (Black) Reventon S V1_1_0_24_stock0v21 King - Golden   Yellow LED on, Red double blink, pause, repeat every 1.84 seconds
SP000063 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
SP000064 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
SP000162 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
SP000162 (Laser Blue); SP000222 (Metal Black Silver) Reventon Pro V1_1_0_24_stock0v21 King - Golden   Yellow LED on, Red double blink, pause, repeat every 1.84 seconds
SP000222 Reventon V20   Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
SP000739 (Silver), SP000740 (Blue) SP000150 (Black) Reventon Pro1.1 EX V1_1_0_24_stock0v21 King - Golden   Yellow LED on, Red double blink, pause, repeat every 1.84 seconds

Team Novak

1755 Pulse Brushless Pro 2S Racing ESC V0   Zero timing- the white LED flashes when the throttle is in the neutral position. Note: The WHITE LED blinking on this Novak ESC is different than previous Novak ESCs where the white LED would be OFF to indicate zero timing

Team Orion

ORI65101 Vortex R10 Pro ESC (120A,1S-2S) 1.68   Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
ORI65102 Vortex R10 Pro ESC (160A,2S-3S) 1.68   Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
ORI65109 Vortex R10 Race ESC (90A,2S-3S) 1.68   Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
ORI65120 Vortex R10 Stock Zero Timing 1.71   Zero timing-the Red LED Flashes when the ESC is active and throttle in neutral position

Team Powers

PRO-C-140A TP-RADON/PRO-C RS-Code-V1.1.xup RC Explorer Company   Blue LED flashes .65 seconds
TP-XPS Pro-C-V1.2 ESC Hardware Ver. 1.2 V0   Zero timing mode indicated by BLINKING Green LRD at neutral. ESC not firmware updateable
TP-XPS EL-C40A ESC Hardware Ver. 1.2 V0   Zero timing mode indicated by BLINKING green LED at neutral. ESC not firmware updateable
TP-XPS/Sport Sport-C-70 ESC Hardware Ver. 1.2 V0   Zero timing mode indicated by BLINKING green LED at neutral. ESC not firmware updateable.

Tekin

TT1152 Tekin RS ESC 223 ** NOTE NEW SOFTWARE PROFILE**   When in LOCKED no timing mode LED 3, 4, 5 will be on and blinking.

Tekin

TT1153 Tekin RS Pro ESC 223 ** NOTE: NEW SOFTWARE PROFILE   When in LOCKED no timing mode LED 3, 4, 5 will be on and blinking.
TT1154 Tekin RS Gen2 Electronic Speed Control 238 and 250 Tekin, Inc.   Zero timing locked SPEC mode- LED's 3, 4, and 5 flash for ROAR events. Unlocked zero timing is LED's 3, and 5 flashing
TT1155 RS Spec 250 Tekin, Inc.   ESC is SPEC mode only- LED's 3, 4, and 5 always flash in neutral
TT1158 RSX 250 Tekin, Inc.   Zero timing locked SPEC mode- LED's 3, 4, and 5 flash for ROAR events. Unlocked zero timing is LED's 3, and 5 flashing

Viper RC Solutions

6VSVT01001 Viper VTX1 A55   GREEN LED Blinks on switch box in neutral
6VSVT10011 Viper VTX10 A55   GREEN LED Blinks on switch box in neutral
6VSVT10015 Viper VTX10 BE A55   GREEN LED Blinks on switch box in neutral
6VSVT10R15 Viper VTX10 R A55   GREEN LED Blinks on switch box in neutral
6VSVT10R20 Viper VTX10R BE A55   GREEN LED Blinks on switch box in neutral